03-02-2023 11:34 PM in
Audio & VideoMy Blu-ray player is not playing Blurays. It’ll only play DVDs and streaming services. I did a factory reset, but I inserted a Blu-ray and I got “Cannot read disc. It does not meet specifications”. Firmware is up to date. I’m thinking it’s the laser that’s the issue. Any solutions?
03-02-2023 11:54 PM in
Audio & VideoHi @Jgj_86 could try a reset do by holding down stop button on player for 5 seconds. Assuming there are no scratches or fingerprints, ensure that BD Live is switched off in case any issues there. I would also check the HDMI cable, a customer discovered in the past that even though DVD's were playing there was a fault with the cable.
However in your case it may well be a problem with the laser and if all other troubleshooting ruled out likely to need a repair. If this turns out to be the case obviously depends if it would be worthwhile.
I do not work for Samsung or make Samsung Products but provide independent advice and valuable contributions.
My Device- S21 Ultra 5G ( SM-998B/DS ) CSC= BTU , 12GB/256GB
One Ui 5.0,Android 13 .