Close

What are you looking for?

cancel
Showing results for 
Search instead for 
Did you mean: 
Go to solution Solved

1010.5 Firmware Update for hw-Q70R/hw-Q80R/hw-Q90R Soundbars

(Topic created on: 04-05-2020 05:27 PM)
64067 Views
Estevez1979
Pioneer
Options

Good morning friends.

 

I've performed the firmware update for my HW-Q90R soundbar.

 

Given that there is no official statement from Samsung with the details of the update  I would like to check with the community what new features have been included.

 

- How can I check now the firmware version on the bar, to check if the rears are updated as well? In the past just by holding the sound mode button on the remote with the soundbar off the different versions appeared on the display.

Now it is not case. Now by holding sound mode for 5 seconds with the bar off it enables a new functionality: Test Tone

 

 

NEW FEATURES

 

- EARC functionality is enabled, this is great.

- Test tone: What it this for? It performs a test of the sound of the different channels, is it useful for anything else?

- Now in the sources appeared TV SPEAKERS, what is this for?

 

I would like to check specially if the update has included any update of the rears and subwoffer

519 REPLIES 519
Demetres
Student
Options

Hello There

 

Yesterday my soundbar as well performed the update to version 1010.5

What i noticed about this update is that the rear speakers they dont turn off (red light) when the soundbar is turned off.

Instead they keep flashing with the blue light like they are unpaired.

 

Any ideas how to fix that?

0 Likes
Estevez1979
Pioneer
Options

I did not experience that issue.

 

I've already managed to perform an update on Rears and Subwoffer. But the update process only lasted 3 seconds, after that the display showed "bye" and restarted.  So it seems that there is not update for sw and rears. 

 

 

0 Likes
Solution
Viorel2018
Pathfinder
Options

Hey! Are you sure that eARC is finally enabled? It should release an update for my Q90R TV also. It should be great if so because I'm waiting for eARC since I've bought my TV. 😁

0 Likes
Demetres
Student
Options

For anyone who has the same problem i finally managed to fixed it.

 

It seemed that the subwoofer was affected by the update. What happened was that i tried to unpair the woofer and speakers and pair them again. What i found in the mean time was that the woofer id button didnt work. Therefore i had to unplug the woofer and plug it again. I redid the pairing process and now everything is working fine.

 

 

 

Namdnas
Journeyman
Options

I just updated via the SmartThings app this morning to version 1010.5.  I also was unable to find any information on this update at this time.  It appears the support site for the Q90R has taken down the update files (which is what caused me to check for an update).

 

I did try holding down the Sound Mode button on my remote, but I do not get a Test Tone.  I've tried it with the bar powered ON and OFF.

 

Estevez1979 - Was the New Features you posted confirmed, or just best guesses?  If confirmed, why does the Sound Mode button not provide a Test Tone for me?

 

Thanks!

0 Likes
Estevez1979
Pioneer
Options
Hi @Namdnas

I've tested myself this morning. And I've re chechecked again right now.

With the power off, press sound mode button for a few seconds and then the testing tone text will appear on the display, and then it will check the sound of every speaker.

"TV Speakers" it only appears on the display with the TV off. I do not know what that is.
Namdnas
Journeyman
Options

Thanks! I got it finally. Had to hold it closer to 10-12 seconds instead of 5. Lol

 

so excited to see this update, finally!

hv25
Apprentice
Options

To check the firmware version on the soundbar, do the following:

 

With the soundbar off (but plugged to the electricity), push and hold the sound control button on the remote (the one with the gearshape) for a few seconds. The led display will show "On" and the firmware version will scroll.

 

This is what I am seeing on my soundbar after updating the firmware via SmartThings:

 

M-0128.0
B-1010.5
H-0051.0
FD-0040.0
W-0241.0
S-0136.0
RR-0136.0
RL-0136.0

 

Just wondering what everyone else is getting on their soundbars.

Dannyxcm
Explorer
Options

I have the same numbers, i checked the rears and sub, have not been updated with the 1010.5 firmware (only the soundbar has) . I can't find any update files to update via usb so i don't know if the rears and sub need updating .

0 Likes