Close

What are you looking for?

cancel
Showing results for 
Search instead for 
Did you mean: 

ww90t554daw program stalls/ not draining

(Topic created on: 08-02-2024 10:14 AM)
257 Views
Dylanrobs
First Poster
Options

ww90t554daw washing machine is not draining, doesn't finish programme and ends up with message about the drain blocked (which I have cleaned a hundred times) I can put the machine to drain and spin, it will stall at 10 mins but it will if I intervene and drain some water (3/4 bucket full) water via the drain hose at the pump. As if there is too much water in machine or there is a sensor fault. I have replaced the pressure sensor for a genuine Samsung unit with no luck. I have also been in contact with Samsung support and carried out a calibration sequence.

0 Likes
1 REPLY 1
Dylanrobs2
First Poster
Options
Fixed, I had checked the drain pump with the filter off, it was spinning. Eventually ordered a complete drain housing and its cured. Removed the old drain pump and stripped it. The plastic impeller would slip on the shaft causing a weak or no pump.