Tauri S22 Ultra screen protector

[Glenntech]

A number of people have recommended this screen protector on this community in various posts.

So I thought that I should see what it's about.

Thought for those wondering. I would go through the installation with you and give you my thoughts at the end.

Sorry if it's a bit long.

In the kit you actually get quite a bit. Including a non slip mat to put the phone on. Great detail, so it's a good start.

First of all, definitely watch the instructional video. Before starting.

This video link is to this screen protector. Think the website takes you to a slightly different version of this protector. 

So including this in case.

https://youtu.be/fG0fgefLEzo

Also what I do is wash my hands, to not only clean them but also wet the skin to reduce any dead skin or dust contaminating the installation.

Definitely clean the surface around where you will be working.

So I started by putting the plastic locator into the charging port of the phone.

Next is to throughly clean the screen, including all the edges. Even on a new out of the box phone.

Throughly dry with the cloth

Now the really important bit.

Gently go round with the sticker getting any dust. Don't forget the side edges.

Doing this gently will hopefully not stir up any dust.

Then it's installation time.

Locate it in the pegs at the bottom of the phone 

Pull off number one tab, and smooth down into place, making sure you have lined up the selfie camera. 

Using the spreader, remove number two piece and smooth out any bubbles. 

Then do number three. Again smoothing out the protector. 

Gently smooth down the sides, and remove the last top layer.

You will hopefully be left with a perfect installation and then leave it a short time to cure.

So what do I think.

Once cured, it becomes really smooth and not really much resistance using the S Pen. 

It doesn't go right to the edges, so it's case friendly. 

I tried it with the Ringke Onxy case

This is a really great alternative to a glass screen protector. It's quite inexpensive, so it's great value for money.

I can see why others recommended this. 

The kit also has camera lenses cover, which I wasn’t keen on and just tried it.

It fitted with the case. The lenses are completely covered.

So will give great protection for the cameras. 

So overall, if like me you don't like glass protectors on curved screen phones.

This will give you the protection from all those scratches etc.

Fingerprint sensor works great as well. Just re-register your fingerprints after the installation. 

I got mine from Amazon

[xvampyrex]

I just got my S22 Ultra yesterday and this is the screen protector I purchased as well. Watching the video before install is definitely recommended as it does not install like a normal screen protector. I am happy with how it looks on my phone, my only mistake was installing it while having my case on, make sure you do not have it in a case when doing the install. I like that they included 2 protectors in the event you make a mistake installing it the first time and the camera protectors are nice if you have a case that doesn't protect the camera lenses. 

[Jemma4321]

I just ordered this now due to reviews. This will be the 4th screen protector since I got the phone on release date. All others I got were glass and a good glass protector just does not exist yet

[fx777]

I'm also using this brand of screen protector, Tauri. As the op says its very good, lines up perfectly and no bubbles. However I am noticing something, maybe its just mine as no one else here has posted about if, but with this protector on if you goto a Web oage or background that has a lot of white you can see discolouration at the edges of the protector. Mine is at the top edge of it running along the whole top but worse at the 2 edges, sort of looks like a reddish tinge but it stops at the punch hole for the camera where its pure white again where the protector isn't applied so it's definitely the protector that it's discoloured. Only visible really on white backgrounds. Anyone else noticing this? 

[Glenntech]

Mine is all OK
Could try lens cleaner and clean over the edges. Maybe it could have picked up dirt from somewhere especially if you have a case where it can collect on the edges.
Or it could be an issue with that screen protector

[Reylob]

I cannot see that tinge. I watched the video several times. The protector worked well. My negatives are the camera protector can come off very easily and the protector is a magnet for fingerprints and marks. A microfiber cloth is very useful.

[vagabonti]

Hello! I had a problem with continuous restarts, sometimes when touching the display. I removed my tread and put it on Samsung. Slight relief. But for a short time. I decided and put again from the first. Restarts have increased. In the meantime, I think I received remote support, after an extremely negative comment on the site, but Samsung is still stable. I only have one restart in two days. Since the screen protector is annoying to Samsung because it doesn't stick well to the edges, I put it on ESR again and it turned out great. It is glued perfectly and with a stable phone it is the top.

[Krisalex79]

https://www.amazon.co.uk/gp/aw/d/B09Y17XYY5/ref=sspa_mw_detail_2?ie=UTF8&psc=1&sp_csd=d2lkZ2V0TmFtZT...

what do you think about this potector? ad says it is ceramic based. As such i expect higher properties compared to the glass protectors. i try to differenciate between the glass based and ceramic based protectors in general.  

[Krisalex79]

does the camera protector, affect the quality or brightness of the photo? 
correct me if i am wrong, but i have the impression that as transparent as it claims to be it still reflects some light away from the camera, which will otherwise get into the camera....

[Glenntech]

I have a lightbox that I used to photograph other things.
Thought it would be perfect for this as you can see all the details

[Reylob]

Technically, it cannot be as good as the naked lenses, but I have not found it to be too detrimental.

My problems with this protector are:

1. Magnet for fingerprints and dust for both, the screen and lenses protectors.

2. The lens covers comes off very easily. (it can be re-attached)

3. The screen protector peels off very easily, it does not last.

Tuari peels off