Washer dryer drain hose

[Salb94]

 

 

 

Hi

got my first Samsung washer dryer

struggling to fit this drain hose into existing sink waste unit

the black end of the drain hose doesn’t sit tightly as you’d expect

any advice?

thanks

[GothicGeisha]

I'll have to look at mine, but I don't think it has the black part on it 🤔

[papashaun]

Firstly will say I am not a plumber and try at own risk 😀
Is a wee bit hard to see relative sizes in the photos, but if the black adaptor can come off end of grey pipe, I would try the grey pipe direct on to the white waste connection. If is a bit tight to get on can try putting the end of the hose in a bowl of hot water for a couple of minutes first. If it seems like it will give you a tightish fit I would also seriously recommend fitting a suitable sized Jubilee clip ( want to slide the Jubilee clip loosely over the hose first before you connect it then once hose is on position the clip in the middle of where grey hose is fitted over the white plastic and tighten it up ) Obviously keep an eye on it for leaks for the first couple of times the machine is on
Should have said earlier - make sure you have a decent amount of the grey pipe on to the waste connection - all the way on if possible

[Salb94]

thanks

let me know

but I believe some of the drain hoses do  have the black attachment

[Salb94]

 

So I’ve trimmed the white plastic spigot. Added some fairy liquid to the black hose end then attached. It seems tight. Looks like this.

does it look okay if I add a jubilee clip?

[papashaun]

Hmm probably - but yeah would add a Jubilee clip but don't over tighten it then check for any leaks at both ends of the black attachment