24-09-2023 11:00 AM
11-07-2024 03:08 AM
Same problem here
11-07-2024 05:30 PM
For the inner screen part, make sure you fold the phone, lock the outer display, then open the inner screen again.
17-07-2024 05:54 PM
I have the same issue with my Z Fold 3 . I went to mobile repairing shop and they told me that the centre area of the phone has connecting strips which would damage after 10,000 counts of opening and closing of phone. Samsung never disclosed this important information.
So, you will have to change the strips and it will cost around 50-100$.
17-07-2024 06:00 PM
10000??
Got the same problem after 2 yrs.
So, I should have been opening and closing the phone at least 13 times each day!!!
Went to Samsung workshop itself and was told that they cannot gtee that when removing the inner screen to repair this strip, the screen will, in practically all cases, have to be replaced at an additional cost of USD 500
17-07-2024 06:28 PM
I just recently faced this issue and had to change the strips which cost me around 80 dollors.
17-07-2024 06:30 PM
Go to any good repairing shop and they will change the strip without damaging the inner screen and you will not lose you data while you activate Maintenance mode but remember the PIN
18-07-2024 08:47 PM
Has samsung come back with when the next update is going to fix the last updae? No sound when I open, no auto rotate... worst update yet. This is an expensive phone bought for these features that are now useless. When is it going to be fixed
19-07-2024 10:51 PM
Samsung is not supporting their devices as they should. The audio drivers are not functional at all, and it is a simple fix for Samsung support team to simply roll-back or re-install good drivers into the software update. The issue is not only with the open screen with no sound but also bad sound when telephone is on, messenger audio, whatsapp calls, and etc. This is a audio driver issue and Samsung does NOTHING. @!!
20-07-2024 11:19 PM
Mine had the no rotate and no main screen sound, updated today rotate works but inner manifold n screen will work only if open to around 90-95 degrees
15-10-2024 08:05 PM