04-08-2020 05:11 PM
Just wondering if anyone has issues with the G7 and connections via DisplayPort, as all I'm getting is a black screen ( HDMI works fine ). I've tried the supplied cable, and a USB-C -> DisplayPort ( both v1.4 ), and the result is the same for both. I've connected it to a couple of MacBooks, a Lenovo, and an iPad. All of them detect the screen, and seem to think they're sending output, but the screen remains black ( oddly, even the coloured lighting goes off ).
Oddly, when connected via DisplayPort, the OSD is extremely limited, the only options I have, are for the OSD, and for resetting the monitor.
I'm on firmware 1005.2, if that makes a difference.
18-02-2021 09:03 AM
I have same problem with the latest firmware ver 1009.3 and display port 1.4. Nothing that I have find hasn't helped in this problem. I have Asus Geforce GTX 970 craphics card with latest drivers >> could this be Geforce related problem? I also have contacted Samsung support two times, but haven't get anything from there and they are even not telling when will there be new version of firmware...
10-04-2021 03:56 PM
Hi, has anyone found a solution to this? I just got my samsung g7 and have attempted to connect it to my razer blade 2020 advanced via the usb-c displayport adapater AND a usb-c to displayport cable with no luck. My laptop is seeing the screen etc but getting a no sigal message on the g7 monitor...
12-04-2021 04:38 PM
I have this also. I have a HP ZBook G7 Fury with a Thunderbolt 230 G2 Dock. All the ports on the dock are fine, except the Displayports. Black screen on monitor. Interestingly the mini-displayport on the ZBook works fine, I just want to use the dock. So, I have tried 2 different cables from Amazon neither have worked, one is 1.2 and the other is 1.4. Another point is that windows display settings can see the device but the Samsung monitor just isn't playing.
So, now having read something somewhere that a displayport cable has to be less than 1.5 metres. Does anyone have anything on this? Can't remember where I saw it either. So I have ordered a 1M cable from Lindy (UK). If this solves the problem for me, I will post back.
30-04-2021 09:41 AM
Yes, I'm on version 1009.3 and running the rx6800xt. Whenever I start up my PC I get the d6 qcode error. When I plug in another monitor I have no issues at all. Definitely a Samsung G7 problem. Hopefully a updated firmware will fix this issue.
30-04-2021 09:43 AM
Wow, if the 1m DP cable works, that has to be a G7 firmware issue. Please let us know.
30-04-2021 10:06 AM
30-04-2021 05:37 PM
Managed to find a solution by eventually buying a cable that does what it advertises as. Went with the brand Cablematters after trying two different brands previously. Same type of cables and connection. Worked instantly after that. Hope you all find the solution to your problems because it drove me mad too.
09-05-2021 02:21 AM
Nice one. I've ordered the cable and praying this works. Thanks.
14-05-2021 06:33 AM
hello
hope some tips below may help
☻ update the firmware to 1009.3 via USB (FAT32) via this link
☻ check if correct source | press button → menu → source → DisplayPort → 1.1, 1.2, 1.4 (depends on DP cable type)
btw, free cable is DP 1.2, not 1.4
☻ as usual turn off and on the monitor
☻ if persists, reset | press button → menu → reset
😉
14-05-2021 06:44 AM