07-12-2016 01:35 PM
When using the K650 sound bar and two R1 Wireless speakers in surround sound mode over wifi with the latest firmware, The quailty of the sound K650 drops, sounds very muddy. As soon as you use the sound bar on it own, the sound bar improves. this is happening for a quite a few users.
can you help.
08-11-2018 05:56 PM
Yet that'sanother problem that you can't select movie music mode etc..neither can you select surround or use the upfireing speakers....
I've heard about using optical aswell but how would that work with the r3s...
Bit of a ***** product really always some limitation! I mean this is 2018 and I've spent thousands on this Samsung tech.
08-11-2018 06:02 PM
Hello,
You can connect R3s in Samsung multiroom app for Android or PC (pc one is *****).
In that app click on three dots near Ms750 and click "surround" or something like that (I have it in my native language so not sure what's there in English app) then drag your R3s to the left and right rear channel. You can also adjust volume there, put them both on +6.
If you have ms750 with the additional subwoofer I strongly recommend you to get dedicated Swa 9000 rear speakers. Theres a mismatch in volume levels with MS Line Soundbars and R3s, and you lose all the additional options for the Soundbar on your remote (like surround, movie etc, even treble/bass settings won't work), so you won't even get those virtual height channels to work. It all works with Swa 9000 speakers, and since you already have the sub you won't need additional wifi dongle.
Also adding subwoofer changes Soundbar's crossover, so I guess it will all be messed up with R3s as rears.
08-11-2018 06:10 PM - last edited 08-11-2018 06:25 PM
So if I buy the swa 9000 rear speakers,how does it connect as a surround ( WIFI ? ) as my soundbar will be in hdmi arc ?
Do I still have to use the multiroom app and group them together ?.
Thx for all the replays much appreciated 👍
08-11-2018 06:34 PM
08-11-2018 06:40 PM
That sounds more like it plug and play.....
Yer I've noticed the Lipsyc bloody annoying..
Well gotta try and convince the wife lol...
Only had the r3s for around 2 months and never hardly used them cause if the bloody WiFi drop outs,the soundbar via WiFi is ok, might take them back to Currys and say they just don't work.
Thx for quick reply much appreciated 👍
25-11-2018 09:49 AM
Hi Guys,
Remember me! How are you guys and your K650?
Not been on here for a while as mine has been working fine with little issue. I recently changed from by BT Home hub to a TP-LINK router to get more signal distance, but now having big issues with connection and slow volume change, so may have to revert back to the BT Hub. I think it's an issue with 2.4ghz as it doesn't have 5ghz which is what I had the BT set up on. I think this just goes to show how important the router is in all this.
Started to notice a small glitch on Netflix too where the sound skips for half a second.
25-11-2018 02:47 PM
Got a 650 with 2 x R1s hooked up - with no major issues. Occasionally I have to reset the 650 as the TV fails to find it on the network.
I moved the R1s and 650 onto the 5ghz (BT Router) channel as most of my other kit is on the 2.4, so wanted to separate the speakers into a dedicated area. I was getting the odd sound skip on the 2.4, but normally this would only occur when watching a bluray - not on any streaming service.
25-11-2018 05:39 PM
Thanks, I think I will have the BT hub for the surround and TV on 5ghz, and have everything else on the TP-LINK.
Hopefully that will fix the Netflix issue and slow volume.
25-11-2018 06:08 PM
I have noticed that when searching for wifi networks through the multiroom app my TV appears to have its own network, so maybe its worth trying to connect to that as a more dedicated channel? Will give it a go when family is out to avoid the usual 'this will only take 5 minutes' - 2 hours later scenario...
When I swapped over to 5ghz I think I ended up resetting all my speakers, and I have also changed the sound settings on the TV to bitstream for the HDMI in, and dolby for the other setting. Whether that makes any difference god knows, but seems to be fine.
25-11-2018 08:32 PM
Thanks,
I am back on BT Hub now and everything seems fine. Now have the TP-LINK router set up as a repeater to give me better distance for tv's in bedrooms.
For anyone else on latest BT home hub; I did notice that when I set my BT home hub up that it comes with 3 modes. Mode 1 is factory preset but the surround sound doesnt like it (drop outs and slow volume control).
If I change it to mode 2 everything is fine. Mode 2 is stated to be slightly less fast and WiFi distance is reduced compared to using mode 1.
Now everything is fine it proves to me that the k650 in multi channel surround mode with R1's does not work well with a tp-link w9970; mainly I think because it only has 2.4ghz.