09-09-2021 09:53 PM - last edited 30-12-2022 06:41 PM
THANK SO MUCH FOR THE 💩💩 XMAS PRESENT FROM ALL US USER'S
AND THANK SO MUCH FOR FIXING SOMETHING THAT WAS NOT BROKEN..... AGAIN 😤
i downloaded this app on the galaxy wear store called ,, "sorry it is in the google app store "
" myWear File Explorer " ... i have no doubt that other app's will work to
install it on both phone and watch , mine is a Galaxy Watch4 Classic 46mm - Paired with S10+
open the app and find the files you want on your phone - send them to your watch4
go to your watch , open the app - " myWear File Explorer " ,the files i transferred were at the bottom of all the folders ,not in a folder..... "it is posible to change the destination folder"
tap/hold , they will go blue then tap the 3 dots on the side to copy,,
scroll to ringtone folder, tap to open and then tap the tick to paste them in the ringtone folder,
also paste them to the notification folder if you want to use them
then check to see if it's in the ringtone folder
go to settings/ sounds and vibration, down to ringtone and when i tapped on it
yeppie i got a new ringtone
i hope you understand how i did it
You may have to turn your watch off and back on
update for everyone ... check out the pic's on page3 / if you do get a bit lost
Now i have over 130+ ringtones notification and alarm sound's after restart
*** please click the - Like Button... ***
confirmed file's that this works with -
.mp3 -- .ogg -- .m4a ,,, have all worked for me and other's...
i've also been told that this will allow you to set custom alarm sounds on your watch,,
and a few have said --
*** a restart must be done to see all custom sounds ***
"I didn't see my custom files on ringtone list even after few restarts. But then I switched in sound settings sound mode from "sound" to "vibration" then to "silent" and again to "sound" and my custom files appeared on a ringtone list.
also see the pic's further on in the post's to help you ,, page 3 💥🤕
it will not be long before someone does a youtube video to show you how step by step
but don't forget it was here first
i just seen there is a video on youtube but it's rubbish.....2weeks old.....todays date 28/11/21
HI ALL ,, IS ANYONE WILLING TO MAKE A FULL VIDEO OF THIS ,, IF YOU CAN PLEASE DO ,,
AS I'M NO GOOD AT THAT KIND OF THING,,
ALL I ASK IS THAT WHO EVER DOES GIVE'S A SHOUT OUT IN YOUR VIDIEO
TO ALL THE PEOPLE THAT HAVE HELP ME OUT WITH THIS
ORyNvxs -- Potshot2k4 and Zaichik for pointing out the watch is Weird, and ME - sjj67
THANKS TO WHO DOES THIS FROM EVERYONE THAT OWN'S A - GW4
Solved! Go to Solution.
27-09-2021 02:19 AM in
I didn't see my custom files on ringtone list even after few restarts. But then I switched in sound settings sound mode from "sound" to "vibration" then to "silent" and again to "sound" and my custom files appeared on a ringtone list. Maybe it will help others too.
28-09-2021 04:55 PM in
I couldn't get the file to transfer across using the app. If it worked I couldn't find it. However I did it like this.
1. Install the MyWear File Explorer on watch.
2. Get mp3 tune on phone. I shortened name but made sure it ended in .mp3
3. Found the music file, clicked and hold it to share, then chose galaxy wear. It asked for a permission, clicked yes. I then repeated the step again. Once downloaded watch offers to open it. Ignore that, unless you want to have a listen. 😀
4. Opened the MyWear file explorer app on watch. Navigated to music/galaxyWearable. Found the track
5. Click and hold until it turned blue, clicked the 3 dots. Then cut , then pressed the arrow at top of screen pointing left twice to get to main folder, then went down to ringtone, clicked into the folder then pressed blue tick.
6 . Went to sound settings and it appeared straight away.
Hope this works for anyone struggling the other way.
05-08-2022 10:41 AM in
I had problem also with the no display the ringtones to the list.
I strugled for a lot of time so i figure it out and came back to help others.
The solution is that you have to restart the watch via force restart
( hold both buttons for 5 seconds)
and not just shutdown and turn on.
JUST that !
Hope i help .
i do this every time i put ringtones,
the other way with putting on vibration,silence and again to sound didnt help to me.
03-12-2022 12:44 AM - last edited 03-12-2022 12:45 AM
23-12-2022 09:11 PM in
Guys... your ring tones are still there.. they are just named different. Go through the sounds and you should hear your custom sounds under the stock sounds names.
25-12-2022 10:21 PM in
I got it to work. After copying it to the watch I tried restarting it, the notification tone didn't appear, tried to switch to mute, vibration and back to sound, still no luck. Then i went on the Galaxy Wearable app on the phone and went though the different standard tones and the last one, while still showing the standard name, played my custom tone instead. Set it and tried it and my watch now makes the sound of a star trek communicator when a notification plays
29-12-2022 04:23 PM in
lets try step by step through each image in order
:click on the three dots
:choose create folder
:click the blank line, type a name of your choice
: you'll wind up back at the home screen, click the three dots again
:click on the existing file string, this will take you to your folders
:scroll down to your new folder name and select folder, click on the tick that follows
:open the folder once your sound file is transfered via phone app
:press and hold the sound file till it turns blue
:click on the back arrow (less than sign)
:open the folder you want to place the sound file in (notification or ringtone
:click the tick.
:your sound file should now be in the folder you chose
:Now its just a matter of going to your galaxy wearable app on your phone, selecting watch settings, sounds and vibrations, selecting either ringtone or notification, and playing each sound option, till your sound file plays.
hope this works!
11-09-2021 04:25 AM - last edited 11-09-2021 04:35 AM
sorry i'll let someone else do it as ,,
the way i have done it worked for me and many other's,,
i only found this by trial and error and hours of headaches ,, i'am no expert ,
i was just lucky to find away to do it and other user's have told/helped me with things and then i've edited this post many time's
but there are so many different things that could be wrong
allowed permissions - incompatible device - and the list go's on
i do hope you do find a way to get it working or you may have a friend who can help you ,,
but at least now you know it can be done, and you don't have to wait for samsung to fix it....
but i will say this if you have the app on both your watch and phone your 95% there, the rest is above,, and if you can do above and it show's the files in the ringtone folder on your watch,, reboot your watch it should work then as the files on your watch are in the right place.....
12-09-2021 03:11 PM in
12-09-2021 03:39 PM - last edited 12-09-2021 04:07 PM
could have put it better,, Weird,, exectly the same thing happened to me ,
not there and then they were and i dont think it's the file lenth , i've a few long ones,
it's the watch - it's gotta mind of it's own...
" thats way i edited the post to say reboot the watch as others have said the same which seems to be what's needs to be done",,
but you've have got it to work so great have fun,,😉
14-09-2021 10:20 AM in