02-04-2024
11:22 PM
- last edited
14-05-2024
12:05 PM
by
AntS
My QE55QN95AATXXU has recently updated its firmware to 2210.
I now find that the Freesat Guide won't update the program synopsis at the top of the page.
If I re-tune to 'Satellite' (rather than 'Freesat', the guide works fine. It seems to be the Freesat guide that has the problem.
I've tried re-tuning and I have also factory reset the TV with no success.
Is anyone else having this problem and, if so, is there a workaround?
Solved! Go to Solution.
02-05-2024 10:34 AM
I'm having the same issue on 2 Samsung TVs since the end of March.
The EPG will populate fine but when I scroll through it, the program synopsis at the top stays on the first channel that the guide displays.
Has anybody figured out a fix for this yet?
09-05-2024 02:07 PM
Samsung Frame 43 2021 firmware 2210.1 The FREESAT EPG is showing the program guide but the information about the selected show does not display. Other than the first show selected. From then on the dynamic information about each channel does not update. I’ve re-tuned several times to no avail, and this problem has only started from the implementation of the above firmware. I spoke to Samsung who said this was a FREESAT issue, which seems unlikely as the information can be selected by using the info button but it should be dynamic. My extended family also have a Samsung TV, a different model running later firmware that doesn’t have the same issue. Anyone got any ideas?
13-05-2024 09:51 PM - last edited 13-05-2024 09:53 PM
I have the same issue and can't find any solution. I've got a QE50Q60A also on version 2210. TV has had a factory reset, but that hasn't fixed it. My old Samsung is still working fine when connected to the same satellite connection. Must be some kind of incompatability between v 2210 and Freesat.
Does anyone from Samsung read these forums and can advise how to raise the issue?
14-05-2024 12:01 PM - last edited 14-05-2024 12:09 PM
An odd one! Can you share the full software version info your TVs are on? Home > Settings > Support > About This TV. (If you're sharing a pic of that screen, make sure to blank out the serial number.)
14-05-2024 12:08 PM - last edited 14-05-2024 12:09 PM
14-05-2024 12:16 PM
Hi AntS
My software version is: T-NKM2DEUC-2210.1,BT-S
Model: QE55QN95AATXXU
14-05-2024 12:19 PM
I suspect it isn't a Freesat problem. Our LG TV (also running Freesat) works perfectly.
14-05-2024 12:39 PM
14-05-2024 12:49 PM
Cheers guys! I've raised it internally at the Samsung end.