Carrier Aggregation - 5G+

[MoverS24]

I have an S24 and that I'm using on a 5G+ plan.  

My mobile carrier is currently running in 5G NSA mode.

I can enter Service Mode and see that the n78 band is connected having a bandwidth of 60 MHz when the 5G+ icon shows.

I can also see the 3 carrier aggregation (CA) bands being utilized as well; mostly bands 7 @20Mhz bw, band 66 @15Mhz bw, and band 2 @ 20Mhz.  (Note -  These bands are all LTE bands)

Question -  1) Can I somehow change the 3 bands being used for CA as well as their bandwidth ?

2) Can I change the bandwidth from 60 to 100 when the n78 band is connected ?

If this can be done, please indicate the steps to do so.     

[GoanGeek]

You seem to be more knowledgeable than us.

We are just a consumer forum here .

Just a hypothesis.

Even if you did manage to change what you want to do I feel it will wreck havoc on your battery and so it wouldn't be wise to do it.
I'm sure there is a reason why they have those restrictions in place.

Also remember 5g is mostly used for downloads for other things the phone will turn to 4g or lower to save battery.

[MoverS24]

Most of the extra battery drain comes from the phone now being connected to an LTE cell as well as a 5G cell simultaneously, hence, the NSA naming.

I also noticed that CA only kicks in when data is actually being transferred; its not present when the phone is idle as far as I could see.

Even if there was a much increased battery drain, I would just put the settings back to what they were. 

[GoanGeek]

I'd. Suggest xda forums. More technical people then here.

Not to mention going any route either then official can invalidate your warranty and stuff.