Close

What are you looking for?

cancel
Showing results for 
Search instead for 
Did you mean: 
Jump to solution Solved

Ecobubble 9kg WF90F5E5U4W door disassembly.

(Topic created on: 19-10-2024 11:25 AM)
170 Views
Gapmeister
Apprentice
Options

I have an Ecobubble 9kg WF90F5E5U4W and I am trying to disassemble the door in order to clean out some dirt that has worked its way inside. However, all of the advice so far is to remove the screws from the inside, but there are none as far a I can see. 

Does anyone know how to disassemble this kind of door?

I've attached a picture of the machine and the back of the door.

 

20241019_105108.jpg

17293334566882144013995672883879.jpg

0 Kudos

1 Solution


Accepted Solutions
Solution
EcoBubbleUser944
Pathfinder
Options
If it's anything like the WD806U4SAGD I had, you'll need to pry the bit that touches the door seal off with a butter knife or something similar. Definitely undo the screws holding the hinge first though.

View solution in context

0 Kudos
4 Replies
Solution
EcoBubbleUser944
Pathfinder
Options
If it's anything like the WD806U4SAGD I had, you'll need to pry the bit that touches the door seal off with a butter knife or something similar. Definitely undo the screws holding the hinge first though.
0 Kudos
Gapmeister
Apprentice
Options

Thanks for the prompt reply. This sounds very promising. I didn't want to force anything but I will try your method with some pry tools I have in the garage.  Can you recommend a starting point, eg by the hinge? Maybe it doesn't matter!

0 Kudos
Gapmeister
Apprentice
Options

Thank you EcoBublleUser944, that was good advise. Simply pry off the transparent section of the door with a strong plastic pry tool (I used US Pro). Once apart, you can see the lugs that hold the disassembled door together. The glass can subsequently be removed. Ensure the glass is the correct way around during assembly, otherwise you risk breaking those lugs.

rreymen
First Poster
Options

Does anybody have a video of this procedure?

 

0 Kudos