I have Smart Things ASpp and have set Rear Speakers to be Max (+6dB)
They are working, but unless you put your ear really near the speaker nothing can be heard.
TV config is set for QSymphony.
On Googling for help, I found these steps - anybody tried it for Q8200B ?
- Using the soundbar remote, click on the Setting button (the cog shaped icon) to switch between the audio and speaker levels.
- Keep the Treble and Bass values at your preference.
- Set the equalizer for Centre Level, Front Top Level, Rear Level and Rear Top Level to the lowest setting (typically -6).
- Turn off the soundbar via the remote.
- Press and hold the 'ID SET' button on the back of both of the SWA-9500S rear speakers for 5 seconds (until they are blinking blue).
- With the soundbar still off, 'ID SET' now needs to be configured on the soundbar via the remote;
This is done by holding down the up button on the soundbar remote control for 5 seconds until the 'ID SET' message appears on the soundbar briefly (let go of the button once you see the message, the soundbar should turn on now). - Check both of the rear speakers LINK LED indicator - it should be a solid blue.
- Using the soundbar remote, click on the Setting button (the cog shaped icon) to switch between Centre Level, Front Top Level, Rear Level and Rear Top Level, (in this order) increasing them to the level of your preference.
Set 'Virtual' to Off, as this appears to mix in one of the front or centre audio channels.
Note: You should increase the levels in the standard order, as my rear speakers appear to have become quieter/reset themselves when I skipped the regular order and increased their levels first before the other speakers.
