29-12-2017 01:16 PM - last edited 17-05-2019 12:40 PM by AntS ) in
Hi I am having an Issue where my gear sports screen goes blank and becomes unresponsive. The watch is still on because if you touch either button it gives the normal feedback vibration. The only way to date I have found of getting it back on line is by hard rebooting it by holding down both buttons. Any help greatly appreciated merry Xmas and a happy New Year.
23-04-2018 10:21 PM
Agreed. THis watch is trash. I'm pretty much done with Samsungs garbage products. This was the last Samusng device I will ever buy.
23-04-2018 10:22 PM
10-10-2018 12:54 AM
Our gear sport after rebooting then download now it's screen is sowings blank,how get it opened
10-10-2018 07:22 AM
I was forced to reboot everytime it happened even mid run. Which is what I bought it for, I returned it after a number of part fixes by Samsung.
02-12-2018 10:55 AM
I FOUND THE SOLUTION.....
I had the same problem, and was searching for the solution for a long time...hope this helps...
WHILE YOU'RE CHARGING YOUR SAMSUNG WATCH, PRESS AND HOLD DOWN POWER BUTTON UNTIL IT POWERS ON..... This worked for me right away and solved my problem. Pls tell me if it worked for you
05-12-2018 07:41 PM - last edited 05-12-2018 07:42 PM
Hi as I'm having the same issue, can you please elaborate how to turn off all auto deselect features in the watch?
Thanks
05-12-2018 07:45 PM
06-12-2018 07:19 AM
I am also having this problem. What should i do the repair cost is way too high.
Help.
Regards,
Brian.
06-12-2018 06:12 PM
Don't buy Samsung watches and your problem will go away. I have determined that they make terrible wearable gear. I have owned 3 different models and they are all garbage.
03-11-2019 04:30 AM
Hi, i found a fix that work. however you have to sacrifice the data on your device.
I had a similar issue on my Samsung Sport so i tried the below method
1. First place your device on the charging pad/dock
2. While its on charge hold down both buttons until you see a reboot screen
it should boot up like normal.
3. While still on charge, navigate to the settings > Generel > Reset
4. After factory reset remove from the charging dock
set it up like how you would
Should work now!
Let me know if this works for you!