Get a 5g router. Someone posted the TV puts out 2.4. If your router is also 2.4 it causes cross talk glitches. I'm using 5ghz router and have no issues.  ... View more

Is there a type c to type a adapter? ... View more

He said he had to have multiroom app and speakers grouped there first. ... View more

I now have clear audio that is no longer muffled and unbalanced.  Hope this helps   Samsung is no doubt working on a fix for that. ... View more

Anyone tried 3117.1? ... View more

I dont get any sound from surrounds when repeater mode is on. Had to turn it off then switch to tv speakers then back to soundbar+ surrounds.    Repeater mode comes up when tapping one of my r1's in advanced settings>network settings. ... View more

Make sure that you dont have repeater mode enabled in the phones multiroom app. Select advanced settings/network settings/tap one or the other r speakers 10 times and repeater mode toggle will show up. Make sure it is off for both r speakers.    I think repeater mode is for people with large homes and many multiroom speakers that wan5 to listen to music throughout their home.   I tested repeater mode on and get no sound from my r1's as surrounds with repeater mode turned on. ... View more

Have you tried soundbar+2ch(wi-fi)?   ... View more

1201.8 is out for tv. I updated but have yet to notice anything changed. ... View more

When you connect soundbar to tv hdmi arc you dont see HW-K650(HDMI) as an available speaker in tv sound settings?    Anyway, select d.in on soundbar and it should switch to tv arc. ... View more

Did you try selecting hdmi hw-k650  in tv's sound settings? Unplug optical cable and select d.in on multiroom app. ... View more

I am starting to think Samsung hit a home run with this update if indeed hdmi arc/d.in multichannel functionality was it's purpose.    Been testing hdmi arc/d.in multichannel with my cable box and it sounds really good. Previously only able to get just okay surround with cable box via optical cable but it never sounded as good as soundbar+2ch wi-fi from other sources. Was never able to get quality audio with surround setup through tv period.    I suspect this update was primarily for hw-k850 owners. The 850 is the same as 950 without wireless atmos surrounds. Atmos only works with hdmi arc connection and 850 users couldn't get sound from radiant 360 surrounds with hdmi arc connection. ... View more

I am not getting any option for dts or dolby digital when connected hdmi arc/d.in multichannel whether I toggle bluray audio from dolby true hd or dts hd ma. I have hdmi output set to bitstream and audio format the only options are either dts neo 2:5 or pcm. Not getting sound from surrounds if I select dts neo 2:5. Playing discretely if I select pcm. Again, I am assuming that it is playing discretely because I am not getting any tell tale left or righr channel dialogue coming from surrounds like happens with matrixed multichannel.    If I set up soundbar+2ch wi-fi with tv and play fantastic beasts and where to find them I get dolby digital as an audio format option when I select dolby true hd option from movies audio format options. If I select the movies dts hd ma track I get dts as an option under tv's audio format options but it only plays as matrixed multichannel.    If I setup soundbar+2ch wifi with bluray player only pcm is available under tv's audio format options but the movie plays discretely when either of the movies tracks are selected.   EDIT I had bluray player set to output PCM instead of bitstream unprocessed. Switched to bitstream unprocessed and am getting dolby digital/dts options on tv audio format. Only getting sound from surrounds when pcm for audio format. Not getting left or right channel dialogue from surrounds so assuming that it is playing discretely. Strange I know as you would expect that pcm would be downmixed to stereo through tv. I do know bluray player sends pcm directly to soundbar when it creates soundbar+2ch wifi. Maybe the audio return channel setup allows for some sort of bypass of the tv doing any processing.     ... View more

I connected.my k650 hdmi arc and tested dts hd ma speaker assignment and it did not play correctly although did get correct audio from lfe when previously nothing when testing dts through tv.    Put Fantastic Beasts and Where to find them in bluray player because it has both dts hd ma and dolby true hd. Getting discrete multichannel from either track but oddly enough only dts neo 2:5 or pcm is available under tv's expert audio format settings.    Soundbar shows tv arc and multiroom app shows d.in and created surround automatically and can control volume with tv remote.    I am assuming that bluray is playing discrete multichannel because I am not getting any tell tale left or right channel dialogue coming from surrounds. ... View more

I have regained full functionality with remote. I have to turn volume up to 50 before the surrounds kick in. They must not have gotten the memo about the change in volume levels from 0-50 to 0-100.    DTS 5.1 still works when bluray player creates soundbar+2ch wi-fi but only matrixed multichannel when tv creates soundbar+2ch wi-fi.    Volume levels are still 0-50 on multiroom app. ... View more

Lost a good bit of functionality with the soundbar remote after 3114. Can't change inputs, can't adjust subwoofer level which is way too loud now. Appears only on off, volume, mute and reset are the only options with the remote.     Before the update, about 25 on the volume level was pretty good, now 12 seems too loud at times and the surround speakers are only audible at the correct level when volume level is about 45.    Too bad they can't have a microphone that you can place at the center of listening area that can calibrate volume levels in multichannel mode.     At any rate, my system is no longer viable for surround sound. Prior to the update I was very happy with the surround sound. It did everything I needed it to do. My blurays sounded fantastic, both DTS and Dolby digital plus played 5.1 discretely when UBD-K8500 multilink created the speaker. Now for all intents and purposes it is only a 3.1 system because the volume level of the surround speakers did not concommitantly adjust to the volume format change of from 0-50 to 0-100. ... View more

I was getting really good surround sound with my ubd-k8500 bluray player making the surround setup. Prior to 3114.2 volume was 0-50 when using bluray player . Now volume is 0-100 and soundbar is too loud and r1's are too quiet.  ... View more

3114.2 is out for HW-K650 if you dare. ... View more

Yes, I have the r1's. I am still having the volume issue. The soundbar firmware upgrade did not solve the issue for my hw-k650 and 2 r1's. ... View more

Anyone else having trouble updating radiant 360's to 3114? Keeps saying update failed. ... View more

Maybe it is Dolby volume control. https://www.dolby.com/us/en/technologies/dolby-volume.html ... View more

I think it is because 1's and 0's are missing from the dd 5.1. DD 5.1 is already a lower quality version of an original recording and if our tv's are not decoding properly the quality will be even worse.    You know, technology has improved to the point that they have to artificially reduce quality in order to maintain different pricing levels.  For example when you buy a bluray movie they usually include the dvd version as well. Presumably so you can compare the differences. The bluray version will usually have Dolby True HD, DTS MA orboth. The dvd version will usually have DD 5.1. The video quality of DVD is reduced from what you get on bluray also. DVD's and cable are considered low quality sources of audio and video. Quality audio is never accompanied by lower quality video.  ... View more

You gotta stop keeping things bottled up Bryantay, just come out and say what you are thinking. Stop sugar coating everything. ... View more

I googled it a month or so ago and it seems to be a Samsung thing. Some type of matrixed version of DTS. I can't tell the difference between that and PCM.   http://www.avsforum.com/forum/166-lcd-flat-panel-displays/1439262-samsung-smart-hdtv-its-dts-neo-2-5-audio-mode.html ... View more

You asked why pcm sounded louder than dd 5.1. PCM is lossless. DD5.1 is not--it is compressed, meaning there are components of the original recording that are missing.  ... View more

PCM is lossless where vanilla version of DD5.1 is very compressed(1's and 0's are missing). DD+ is compressed also but is, for most people indistinguishable from lossless. ... View more

If you have dolby digital available as an audio format while that "lpcm" clip is playing then it is dolby digital not lpcm.   If it is dolby digital I dont understand why I cant play it from bluray players youtube app and send it to tv hdmi bitstream unprocessed.  ... View more

Plays correctly from tv's youtube app with wi-fi surround setup by tv.    Was just saying that I couldnt get it to play correctly through hdmi from bluray player to tv with tv wi-fi surround setup. ... View more

I pulled that youtube on my bluray player with wi-fi surround setup made by tv and couldnt get it to play correctly with any of the bluray players hdmi audio out settings. PCM, bitstream unprocessed or bitstream reencode dolby digital. Made the wi-fi surround setup with bluray player and it plays correctly. ... View more