01-04-2023 11:06 PM in
admittedly if might be a couple of months since I last cleaned it with a toothbrush and hot clean water - but look at it now! . WW90T534DAW Autodose Washing Machine series 5
I would just like to point you to the Advertising Blurb on the Currys website for the machine :
"- A Stay Clean drawer and Eco Drum Clean function gets rid of any detergent build-up"
ah right yes... a stay clean drawer - very interesting!!
And this off of the official Samsung site for this machine:
in reality this is what you get - it does not look clean to me!:
Don't always believe everything you read and don't believe the hyped up manufacturers advertising! - no problem at all if they say "we stand by what we say (or advertise) or your money back" - but they don't, once you have bought it that's it you are on your own!
Machine is just over a year old and I am happy with it on the whole - its just that when you do your research and certain features do not live up to their expectations when you read the advertising blurb ... well you do feel like you have been done over a bit or had or duped into buying!
our water is not really that hard where we are at all, the kettle in the kitchen doesn't seem to furr up and there is no limescale around the taps or sink. - so its a bit surprising there is quite a bit of limescale in the drawer housing
02-04-2023 12:52 AM in
23-04-2023 11:50 AM - last edited 23-04-2023 11:54 AM
I’ve had a series 8 for about three months and I’ve noticed mould on the manual dispenser. I’ve only used autodosing or in the drum capsules so not used the drawer. I’ve done the drum clean option twice since having it. It didn’t remove the mould so I had to clean it myself.
23-04-2023 08:44 PM in
23-04-2023 11:34 PM in
The drum clean only really cleans the inner and outer drum as well as the seal. It doesn't do a dispenser clean too, sadly.
No thats right. Their blurb says specially designed powerful jets to clean the soap dispenser drawer and compartment "cleaner clothes start with a clean washing machine" - but i suspect these powerful jets in the soap dispenser housing are in the non-autodose machines only .
23-04-2023 11:41 PM in
I've been using the same machine as you (only difference being the colour) for nearly 5 months and haven't spotted any mould. I do however do 60⁰C washes often (at least once a fortnight), so I'm wondering if the heat transferred up to the detergent drawer housing has an effect on preventing mould building up. I pretty much use detergents the same way as you have.
I do regular 60'c washing as well in my machine. If anything I find that moist and warmth (the warm/steam the from a 60'c wash) could be getting up into the soap dispenser housing then sitting there not being dried out properly would be a ideal breeding ground for mould.
On the 'non' autodose machines - manufacturers will say "to dry out your machine properly, after every wash leave the porthole door of your washing machine and your soap dispenser out slightly to let air circulate and dry out the machine properly"
But apart from it being inconvenience leave the autodose drawer open (or removing it completely after every wash) to all dry out not only would it be inconvenient I would worry about the rubber seals at the back of the drawer on the autodose system wearing out more than they should doing that.
24-04-2023 06:24 PM in
24-04-2023 08:38 PM in