A number of people have recommended this screen protector on this community in various posts.
So I thought that I should see what it's about.
Thought for those wondering. I would go through the installation with you and give you my thoughts at the end.
Sorry if it's a bit long.
In the kit you actually get quite a bit. Including a non slip mat to put the phone on. Great detail, so it's a good start.
First of all, definitely watch the instructional video. Before starting.
This video link is to this screen protector. Think the website takes you to a slightly different version of this protector.
So including this in case.
Also what I do is wash my hands, to not only clean them but also wet the skin to reduce any dead skin or dust contaminating the installation.
Definitely clean the surface around where you will be working.
So I started by putting the plastic locator into the charging port of the phone.
Next is to throughly clean the screen, including all the edges. Even on a new out of the box phone.
Throughly dry with the cloth
Now the really important bit.
Gently go round with the sticker getting any dust. Don't forget the side edges.
Doing this gently will hopefully not stir up any dust.
Then it's installation time.
Locate it in the pegs at the bottom of the phone
Pull off number one tab, and smooth down into place, making sure you have lined up the selfie camera.
Using the spreader, remove number two piece and smooth out any bubbles.
Then do number three. Again smoothing out the protector.
Gently smooth down the sides, and remove the last top layer.
You will hopefully be left with a perfect installation and then leave it a short time to cure.
Once cured, it becomes really smooth and not really much resistance using the S Pen.
It doesn't go right to the edges, so it's case friendly.
I tried it with the Ringke Onxy case
This is a really great alternative to a glass screen protector. It's quite inexpensive, so it's great value for money.
I can see why others recommended this.
The kit also has camera lenses cover, which I wasn’t keen on and just tried it.
It fitted with the case. The lenses are completely covered.
So will give great protection for the cameras.
So overall, if like me you don't like glass protectors on curved screen phones.
This will give you the protection from all those scratches etc.
Fingerprint sensor works great as well. Just re-register your fingerprints after the installation.
I got mine from Amazon