Speaker thread Q930B

[Englandkeeomybones]

Hello does anyone now the size of thread needed for the rear speakers? 

[Peter930]

For the wireless rear speakers on the HW-Q930B Soundbar the surround speaker wall mounts must be able to support more than 17.6lbs. Hole size on the back of each speaker: 1/4 - 20 UNC threaded insert You'll use a standard screw: 6.35 mm (0.25 Inch) with a 1.27mm (0.05 inch) pitch, and a length of 18mm (0.70 inch) long.

[RamZ1]

Do you know where I can find these? 

[Peter930]

I used these from amazon £4.49 they fitted the speaker

[uadissa]

Thanks heaps for the thread. This helped selecting the correct bolt 

For someone in Australia , following will work. Basically a standard 1/4’’ 18mm bolt. 

https://www.bunnings.com.au/zenith-1-4-x-25mm-zinc-plated-countersunk-head-bolt-and-nut-12-pack_p242...

[Josh191]

Thankyou so much

[vip2903]

Thanks for asking.

If Someone is in Australia, the following will work.

These are from Total Tools.

[HarrowBaggie]

Hi
Do you have a link for these please ?
Thanks