07-12-2016 01:35 PM
When using the K650 sound bar and two R1 Wireless speakers in surround sound mode over wifi with the latest firmware, The quailty of the sound K650 drops, sounds very muddy. As soon as you use the sound bar on it own, the sound bar improves. this is happening for a quite a few users.
can you help.
24-06-2017 09:30 PM
Gives full details here
https://hdclub.org/details.php?id=15777
Might as well be Japanese as far as I'm concerned
24-06-2017 09:32 PM - last edited 24-06-2017 09:36 PM
Plays correctly from tv's youtube app with wi-fi surround setup by tv.
Was just saying that I couldnt get it to play correctly through hdmi from bluray player to tv with tv wi-fi surround setup.
24-06-2017 09:43 PM - last edited 24-06-2017 11:00 PM
If you have dolby digital available as an audio format while that "lpcm" clip is playing then it is dolby digital not lpcm.
If it is dolby digital I dont understand why I cant play it from bluray players youtube app and send it to tv hdmi bitstream unprocessed.
24-06-2017 11:54 PM
OK Everyone - here is a test file to play with:
https://www.dropbox.com/s/1awk1cj45aksurq/Samsung%20Surround%20%26%20Sub%20Test.mp4?dl=0
Download the file - put it on a memory stick - and play it from the TVs USB slot.
It is encoded as Dolby Digital 5.1 and contains two sequences of pink noise.
In the first sequence the pink noise is sent only to the main channel and is not sent to the sub channel.
In the second sequence the pink noise is sent to both the main and sub channels.
On my system it is pretty clear what is going on.
In the first sequence the active crossover of the K650 is sending some signal to the sub from the front left and front right channels only but not the centre or the rears
In the second sequence the sub receives signal correctly for all channels.
What does this mean in practice?
Well, if the source is authored with a discrete sub channel created by the mix engineer the soundtrack will play correctly. But if the source relies on sending full range signals to the 5 channels but no separate signal for the sub, only the front left and right will gain sub support, leaving the centre weak.
Is this a real world problem - well I think that members of this group have shown that it can be an issue on specific mixes but not everything. I have yet to hear a problem on any of my DVDs or BluRays but in truth I havent been looking for it.
The fact that the MS650 apears to handle this better suggests to me that samsung are fully aware of the limitations of the K650...
25-06-2017 12:27 AM
Thanks Simon
I will give it a go. So basically a real 5.1 track that has a discrete sub channel to compliment the other channels will.play fine. This might be why I haven't noticed a problem. All my movies are DD 5.1 or DTS with the exception of my new 4K blurays that are atmos. New soundbar in the future will be needed. I use kodi to transcode my DTS tracks to DD to get around the K650's lack of support.
Lee
25-06-2017 04:38 AM - last edited 25-06-2017 04:40 AM
Here is the easiest way for me to demonstrate the lack of sub support on the center channel.
25-06-2017 06:19 AM - last edited 25-06-2017 04:52 PM by RyanM ) in
simon_w wrote:
In the first sequence the active crossover of the K650 is sending some signal to the sub from the front left and front right channels only but not the centre or the rears
In the second sequence the sub receives signal correctly for all channels.
What does this mean in practice?
For me, in the first sequence, the K650 is sending some signal to the sub from the front left and front right channels only, but not the centre or the rears.
Are you saying that K650 should not do this - there should be no sub for left & right channels? Is this a defect that Samsung should fix?
How would this fix my issue (my center channel is tinny on DD 5.1 movies)? If Samsung removes the sub from left and right channel then surely this H650 would sound cr****er than now. What is needed is for the sub to be active when the center plays.
25-06-2017 07:08 AM - last edited 25-06-2017 09:46 AM
@simon_w wrote:My setup is no HDMI or optical - just WiFi to the soundbar and R1s but with a Samsung Hub
Netfix, Amazon Prime, YouTube via the TVs apps and Live TV (so oldschool!)
Cheap Smsung BluRay player (without the extra wifi ability)
4k BT TV box over HDMI
What is worth noting is that both the picture and the sound settings on the TV are per source so if youre using bitstream and dolby digital you need to revisit the settings for each source and check what they are...
What I understand is that the HDMI Audio Format settings have no effect on a soundbar conneceted over WiFi
HDMI Audio Format | PCM sends uncompressed stereo (2.0) over HDMI (and also over the optical connection)
HDMI Audio Format | Bitsream sends compressed multichannel audio (either Dolby or DTS) over HDMI
Audio Format is the one that effects the Soundbar over WiFi
Audio Format | PCM sends uncompressed stereo (2.0) to the soundbar
Audio Format | Dolby Digital sends a compressed dolby formatted bitstream that can be 2.0 or 5.1 depending on the source.
On my TV the other two options of DTS and DTS Neo 2:5 are greyed out
To reiterate what I have said before - but with careful use of pseudo not faux 😉
If you are set on Audio Format | PCM the soundbar will create a pseudo surround presentation based on the stereo content. This always seems to have plenty of bass in the centre channel.
If you are set on Audio Format | Dolby Digital and the source is stereo (2.0) you will get stereo on the soundbar with no reprocessing. This always seems to have plenty of bass too.
If you are set on Audio Format | Dolby Digital and the source is surround (5.1) you will get discrete surround on the soundbar with no reprocessing. This may show a lack of bass in the centre channel depending how the Dolby Digital bitstream is authored and how the soundbar interprets this.
It is unusual to only put dialogue in the centre channel - normally it is spread between L C R equally and will appear as if in the centre. This is a legacy from when 4.0 was a common set up (no centre channel and no sub).
In the authoring you have to specify what type of speaker the surround mix is intended for - small / medium / large - this changes the way the sub channel is used as often instead of being sent as a discrete channel it is entirely derived in the surround processor. We dont know exactly how the K650 handles the sub channel but it would appear that it is predominantly derived from the front left and front right channels and not from the centre channel - this is apparent on the test file that Lee circulated a while back - lots of sub on L/R - none on C or surround L/R - but I'm still not convinced this is a real world problem as I have yet to hear actual programme that is weak in centre dialogue...
Comparing the PCM setting to the Dolby Digital setting is like comparing apples and pears - the overall volume will be different as will the surround presentation - and percived bass is very level dependent.
Similarly comparing the K650/R1s with another surround setup is tricky because we dont know how the two systems differ in the way the sub channel is derived.
What I will try and do over the weekend is author a short Dolby Digital test file myself which might help shed some light on this - one where I can control from the metadata how the sub behaves... I will circulate this for others to try out if I can get it to work !!
That's not what my Samsung TV manual says.
The manual says:
HDMI Audio Format.
Sets the format of the audio input signal so that it is suitable for the external device connected to one of the TV's HDMI ports.
Audio Format.
Selects tbe digital audio output (S/PDIF) format. The available formats depend on the input source.
Oh, the obscurantism.....
25-06-2017 08:58 AM
25-06-2017 09:07 AM
Hi Peejay
It could be a streaming media issue. If it is though they shouldn't advertise it as being 5.1 as that implies a separately encoded sub channel. If the sub track is embedded into the front left and right channel it's a bit naughty lol. I haven't tried the Netflix test pattern yet but I will. :-). I watch most of my movies either direct from bluray or from my hard drive via Kodi. I ripped them all myself and with the multi channel soundtracks in tact. My separates system is still at my parents house all set up so next time I am there I will do some testing on that to see how it differs from my soundbar setup.
Lee