Quick question for Tarbat - would the Integral be able to act as a switch for two HDCP 2.2 inputs to one output?
Yes. I’ve used mine with the Roku Stick+ on one input and Sky Q on the other input.
Looks like I will need one for SkyQ and BT TV UHD box......hopefully they will both be transmitting football in 4k HLG next season!
Just remember that even with the HDFury sending the corrected EDID, the TV still doesn’t used the correct HLG curve. You’ll get the rec.2020 colour space, but not the HLG EOTF.
@ne_on you're welcome. Yes. Turn everything on and forget it
10bit and 12bit have been called "deep colour" in the past. In the days when nothing was outputing them! And I never really understood what it meant at th etime.
We have 10bit panels for our TVs, but they accept a 12bit signal just fine and down-sample it to 10bit for display.
And you'll see that for some HDMI modes, the 12bit version is used as a "container". It's only got a 10bit resolution picture in it, but there's no 10bit mode to use, so we use the 12bit mode instead.
example. 8 bit, we know has 256 possible values, 0-255.
10 bit, we know has 1024 possible values, 0-1023 but instead, why not think of those values as
1.25, ... etc up to 255 on the 8-bit scale.
0 is still black and 255 is still full white, but we have more resolution, more steps, and less visible "banding". Instead of only 256 different pure blues going from dim to bright we have 1024, and the "whole number" blues on both scales are the exact same colour as each other.
The same thing applies when using a 12bit "container" but only putting a 10bit picture in it, as in the 12bit 4:2:2 mode. You just aren't using all of the precision that the 12bit mode could carry. A bit like having decimal places which you don't use. They are zeros which are just there and not filled with 0.25, 0.5, 0.75 etc.
Tarbat, Thanks for the heads up.......have seen your posts
After watching the World Cup on the Roku in rec.2020 and even with an incorrect HLG curve, it looks so much better/brighter/vivid than Sky and BT UHD..........I keep having to check I have the brightness set correctly when I put on the Sky or BT......it looks so dull, whereas before the World Cup I was extremely happy.
Have a 5 year warranty from JL, so no intention to change until that runs out.
My thoughts exactly. Samsung have been gits over this but this is the best TV I have ever owned. Two years in and the PQ is still stunning and like you its under a five year JL warranty.. As you say the football via the Roku+ is a sight to behold.
@mrtickle. Your very smart when it comes to this stuff.great explanation and diagram.
is there any way on the Samsung ks7000 to see what colour depth and chroma we’re using like Vincent does?
Very kind. No, there isn't much to my annoyance. The Info banner is it. My commentary on what it should look like, but Samsung won't do it: :(
Vincent said he used that projector specifically to get those displays for that particular video.
MOST displays don't give the information :smileyfrustrated:
Lastly, from looking at your table. It seem that a watching 4k blu Ray in hdr which are 4k24 shouldn’t have any problem displaying at 4.4.4 with a decent cable given the obtainable bandwidth. Having the 4.2.2 checked on the Xbox wouldn’t downgrade would it as it would be a lower bandwidth therefore easier? Or does it go for the best first?