04-05-2017 04:45 PM
I'm having trouble with my washing machine. The model is WF80F5E5U4X. The washing machine kept stopping in the middle of the cycle and switching itself off. It would turn itself back on and try to complete the cycle but would switch off again without completeing the cycle. It kept repeating this. I plugged it out and cleaned out the debris filter.
I plugged it back in and the same issue occurred again, even when i emptied the drum and put it on the drum clean cycle. Now the washing machine will not turn on. No error messages were displayed during any of these issues.
Does anyone know what the problem might be?
Thanks
07-06-2018 06:36 AM
Thank you that's useful to know.
25-06-2018 10:44 PM
I also have the same problem on a machine just over 2 years old. Samsung have been no help at all. I am very disappointed. Did you replace the main circuit board or the front face with the buttons and screen?
25-06-2018 10:45 PM
Hi
I also have the same problem on a machine just over 2 years old. Samsung have been no help at all. I am very disappointed. Did you replace the main circuit board or the front face with the buttons and screen?
26-06-2018 07:46 AM
Just the main Pcb inside the top front right of the machine.
30-08-2018 03:32 AM
30-08-2018 03:34 AM
02-09-2018 05:28 PM
I replaced the circuit board but not the front part with the screen. Unfortunately, the machine still didn't work. I put the old circuit board back in and then a friend of mine plugged and unplugged a few of the connections on the board whilst the machine was plugged in and it seemed to reset itself and sprang back to life.
06-10-2018 06:28 AM
Hi we have the same problem with our eco bubble ours is graphite but the model number is different WF70F5EDW4X it looks the same apart from the colour could it be the same problem with our model too ?
06-10-2018 02:03 PM
24-10-2018 07:29 PM
I have had the mother board replaced 14month ago and now have no power to the machine. The socket and the fuse box are fine. Could this be the same problem again? These machines seem very unreliable. Any thoughts?